95 mm x 200 mm x 77,8 mm FAG 3319-M Angular Contact Ball BearingsCross reference
| G1 | 50 mm |
| Hydraulic nut | HMV 150 E |
| d1 | 670 mm |
| d | 710 mm |
| B1 | 286 mm |
| G2 | G 1/4 |
| G | Tr 750x7 |
| Nut for removal | HM 30/750 |
| A | 15 mm |
| B2 | 302 mm |
95 mm x 200 mm x 77,8 mm FAG 3319-M Angular Contact Ball Bearings Specifications
Reference speed:11000 r/min; Limiting speed:12000 r/min; U:30 mm; Fw:35 mm; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 35x45x4; Basic dynamic load rating C:50.1 kN; Fatigue load limit Pu:10 kN; Basic static load rating C0:80 kN; Ew:45 mm; Mass needle roll
Read More ...
Basic Dynamic Radial Load Rating C:956 N; Fillet Radius ra:0.30 mm; Shielded or Sealed B1:5.0 mm; Grease Speed Rating Open/Shielded n1:57000 rpm; Basic Static Radial Load Rating Co:490 N; Sealed Speed Rating n3:40000 rpm; Oil Speed Rating Open/Shielded n2:69000 rpm; d:4.800 mm; Accessories:Two Shiel
Read More ...
F:35 mm; d:30 mm; r, r1,2 min.:0.3 mm; B:20 mm; Mass inner ring:0.039 kg;
Read More ...
Bearing limiting speed:7500 r/min; H1:82.55 mm; Mass pillow block:12.4 kg; Initial grease fill:136.08 g; Labyrinth ring:2 x LER 25; Cap bolt, SAE grade:8; P120°:13.3 kN; Appropriate attachment bolt size G:0.5 in; P60°:35.6 kN; P90°:21.4 kN;
Read More ...
Grease Speed Rating Open/Shielded n1:10000 rpm; Basic Dynamic Radial Load Rating C:19500 N; Oil Speed Rating n2:13000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:11200 N; Oil Speed Rating Open/Shielded n2:13000 rpm; B:16.00 mm; Accessories:Two Shields; Grease Speed Rating n1:10
Read More ...
D:637 mm; Mass bearing:170 kg; K:9 mm; d:487.98 mm; Da min.:611 mm; s max.:4 mm; Basic static load rating C0:7600 kN; rb max.:4 mm; Basic dynamic load rating C:3000 kN; Reference speed:670 r/min;
Read More ...
Stabilizing ring:2 x A8897; Da:359.999 mm; Max. speed for PosiTrac Plus seal:640 r/min; R2:42.862 mm; Cap bolt recommended tightening torque:271.2 N·m; Pa:66.7 kN; Appropriate attachment bolt size G:1.25 in; Initial grease fill:2154.6 g; J max.:635 mm; A2:285.75 mm;
Read More ...
Mass shaft washer:4.06 kg; d:190 mm; r1,2 min.:2 mm; d1:267 mm; B:18 mm;
Read More ...
ba:75.406 mm; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:203.4 N·m; Da:319.999 mm; P150°:75.6 kN; S:4.763 mm; A1:180.975 mm; A2:250.825 mm; Labyrinth ring:2 x LOR 146; Ca:95.809 mm;
Read More ...
Basic Static Radial Load Rating Co:20400 N; Fillet Radius rb:0.30 mm; Oil Speed Rating n2:9500 rpm; d:55.000 mm; D:80.0000 mm; Basic Dynamic Radial Load Rating C:22900 N; Fillet Radius ra:1.00 mm; B:13.00 mm; Grease Speed Rating n1:8000 rpm;
Read More ...
L:387.35 mm; R1:58.737 mm; J1:60.325 mm; Appropriate attachment bolt size G:0.75 in; Labyrinth ring (db shaft position):LOR 118; Housing:FSAF 220; J max.:333.375 mm; Labyrinth ring (dc shaft position):LOR 106; Ca:55.804 mm; H2:44.45 mm;
Read More ...
Oil Speed Rating n2:4300 rpm; Sealed Speed Rating n3:3200 rpm; d:70.000 mm; Accessories:No Shield, no Seal; Basic Static Radial Load Rating Co:80000 N; D:125.0000 mm; B:39.70 mm; Grease Speed Rating n1:3200 rpm; Basic Dynamic Radial Load Rating C:88400 N; Fillet Radius ra:1.50 mm;
Read More ...
G:M 30x1.5; d:30 mm; Lock nut:KMFE 6; Mass adapter sleeve assembly:0.13 kg; d1:23.813 mm; d3:45 mm; B1:31 mm; B:10.5 mm;
Read More ...
Da:47.5 mm; F:40 mm; D:55 mm; ra max.:0.3 mm; db:39.5 mm; r1,2 min.:0.3 mm; Db:40.6 mm; Mass bearing:0.19 kg; E:47 mm; da:46.2 mm;
Read More ...
End plug (suffix Y):EPR 12; J1:69.85 mm; Labyrinth ring:2 x LOR 101; J min.:336.55 mm; H1:133.35 mm; h:55.563 mm; R1:79.375 mm; Adapter sleeve assembly:SNW 120x3.3/8; P60°:185 kN; P180°:81.4 kN;
Read More ...
| interchange 95 mm x 200 mm x 77,8 mm FAG 3319-M Angular Contact Ball Bearings guide |
| R | a | D | C | T | B | d | m |
| 3319 | - | 104 mm | 200 mm | 238 kN | - | - | 95 mm | - |
| 3319-M | - | 143 mm | 200 mm | - | - | 77,8 mm | 95 mm | 11,4 kg / Weight |
| EE333137/333197 | - | - | 501,65 mm | 69,85 mm | 90,488 mm | 84,138 mm | 349,25 mm | - |
| 43112/43319D+X1S-43112 | 0,8 mm | - | 80,962 mm | 39,688 mm | 55,562 mm | - | 28,575 mm | - |
| 43117/43319D | 1,5 mm | - | 80,962 mm | 39,688 mm | 55,562 mm | - | 29,987 mm | - |
| 43118/43319D+X1S-43118 | 1,5 mm | - | 80,962 mm | 39,688 mm | 55,562 mm | - | 30,162 mm | - |
| 3319-M-C3 | - | - | 7.874 Inch | 200 Millimeter | - | - | 3.063 Inch | 77.8 Millimeter | 3.74 Inch | 95 Millimeter | - |
| 3319-M | - | - | 7.874 Inch | 200 Millimeter | - | - | 3.063 Inch | 77.8 Millimeter | 3.74 Inch | 95 Millimeter | - |
| 3319-M | - | - | 200 mm | - | - | 3.0625 in | 95 mm | - |
English
2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter NSK 5312-2RSNRTNC3 Angular Contact Ball Bearings
2.559 Inch | 65 Millimeter x 5.512 Inch | 140 Millimeter x 2.311 Inch | 58.7 Millimeter NSK 5313-2RSNRTNC3 Angular Contact Ball Bearings
2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter NSK 5312TNC3 Angular Contact Ball Bearings
2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter NSK 5312J Angular Contact Ball Bearings
2.362 Inch | 60 Millimeter x 5.118 Inch | 130 Millimeter x 2.126 Inch | 54 Millimeter NSK 5312NRTNC3 Angular Contact Ball Bearings